Smurfit Kappa creates bespoke TopClip system for mid-sized breweries

BeerSelect is the first brewery in Belgium to use Smurfit Kappa’s automated TopClip system

Smurfit Kappa has provided a pioneering Belgian craft brewer with an end-to-end packaging system, TopClip, the 100% paper-based replacement for shrink wrap that bundles beverage multi-packs.

BeerSelect has enjoyed significant growth over the last three years and attracted considerable attention from investors and beer drinkers alike. The brewer was looking for packaging that would align with its sustainability aspirations, and an automated machine system to efficiently produce the solution in-house.

Smurfit Kappa reviewed every aspect of BeerSelect’s operations and decided that the most effective solution was to build and install its Mid-Speed TopClip machine at BeerSelect’s green-field brewery. This machine has proven its worth for many small and medium-sized drinks companies as it can handle 30,000 cans per hour and is flexible enough to switch between different configurations to bundle four, six and eight packs of cans.
https://www.smurfitkappa.com/newsroom/2024/smurfit-kappa-creates-bespoke-topclip-system-for-mid-sized-breweries

Related Posts

American Forest & Paper Association Releases June 2020 Packaging Papers Monthly Report

Total Packaging Papers & Specialty Packaging shipments in June increased four percent compared to June 2019. They were up two percent when compared to the same six months of 2019. The operating rate was 86.8 percent, essentially flat (-0.1 pts.) from June 2019 and down 1.2 points year-to-date. Mill inventories at the end of June decreased 5,000 short tons from the previous month and were up 17,000 short tons compared to June 2019.

Long production interruption at Metsä Board’s Kemi board mill

On 21 March 2024, a gas explosion occurred at the evaporation plant of Metsä Board's associated company Metsä Fibre's Kemi bioproduct mill. Three people were slightly exposed to hydrogen sulphide and were referred for a health check. The persons have returned to work after the check. Metsä Board's Kemi board mill, which produces white kraftliner, is part of the Kemi integrated mill. Metsä Board's board mill was not damaged in the explosion, but the mill is not operational because unbleached pulp cannot be produced without the chemical recovery of the bioproduct mill. Due to repair work of the evaporation plant at the bioproduct mill, Metsä Board's board mill is currently estimated to be out of production for approximately 10–12 weeks. The company investigates the possibility of restarting the board production at a significantly lower production level than normal during the repair work at the bioproduct mill. In addition, the company explores possibilities to offer alternative products to customers.

Metsä Group has selected key partners for the pre-engineering project for Muoto™ packaging factory

Metsä Group's pre-engineering project for a potential commercial-scale Muoto™ fibre product plant is progressing as planned. After the pre-engineering phase, Metsä Group may consider making an investment decision. The partners selected for the pre-engineering project are Elomatic, SRV, Valmet Technologies and A-insinöörit Suunnittelu. SRV will act as project management contractor for the construction project and will also be the engineering design partner for the building services. Elomatic has been selected as the main design partner for the design of the factory structure and facilities and will assist in the cost planning and construction schedule. Valmet will act as process engineer for the fibre product in the project. A-insinöörit Suunnittelu Ltd has been selected as the plant construction design partner for the project.
Back To Top
×Close search
Search