Norske Skog Saugbrugs and Bergene Holm reduce emissions by moving from trucks to train

The transport of timber and wood chips between Larvik and Norske Skog Saugbrugs in Halden has long taken place using trucks. Norske Skog is now using trains on the stretch, which will significantly reduce CO2 emissions from the transport.

The train line will transport timber and wood chips from Bergene Holm in Amundrød near Larvik to Norske Skog Saugbrugs in Halden. The transport to the east will consist of an approximate 50/50 split between wood chips from the sawmill at Amundrød and pulpwood from surrounding forests. In return, Bergene Holm will transport sawn timber from the Halden area to the sawmill at Amundrød.

  • Norske Skog Saugbrugs works actively to streamline the flow of goods in and out of the factory at the same time as we have set high sustainability goals. With the railway freight of wood chips from Larvik to Halden, we will remove 800 truck loads from the roads. This is a good traffic safety measure, but will also be an excellent environmental improvement as CO2 emissions are reduced, says Kjell Arve Kure, CEO of Norske Skog Saugbrugs.

Thanks to Norske Skog Saugbrug’s strategy of moving transport from road to rail, by the end of 2021 the company will annually have a total of 7 500 fewer lorries on Norwegian roads compared with 2015. Following the introduction of all transport measures, Norske Skog Saugbrugs will have reduced CO2 overall emissions for inbound timber and wood chip logistics by just over 25 per cent.

  • Bergene Holm transports 7-800 lorries from the factory in Larvik to Norske Skog Saugbrugs. Using the train both directions between the proposed terminal in Larvik and to Halden will provide environmentally friendly and efficient transport between the mills. Today’s terminal in Skien is not an appropriate or environmentally efficient location for Bergene Holm as it is located in the wrong geographical direction and increased transport distances and costs result in negative environmental accounts. The train will also contribute to securing the raw material supply to the sawmill in Larvik by allowing sawn timber to be returned, says Erland Løkken, CEO of Bergene Holm.

Norske Skog’s transition from road to rail has already begun, made possible by previously completed rebuilding to increase the capacity for receiving industrial chips in Halden. The train transport from Amundrød to Norske Skog Saugbrugs started already on 20 November 2020, but requires further measures to reduce transport costs. The most important measure is to move the loading and unloading station from Borgestad to Larvik Harbor. The Port of Larvik has applied to Larvik Municipality for permission to do so. The municipality’s processing of the application will be completed with meetings of the chairmanship and the municipal council, on 9 and 16 June, respectively.

In addition to lower greenhouse gas emissions, traffic safety will also benefit from Norske Skog’s initative by removing thousands of trucks from the roads. Locally, the measures will also contribute to reduced airborne dust and less emissions of exhaust in places such as Oslo and Halden.
https://www.norskeskog.com/Investors/Press-releases/English-press-releases/Norske-Skog-Saugbrugs-and-Bergene-Holm-reduce-emissions-by-moving-from-trucks-to-train?PID=4241&M=NewsV2&Action=1

Related Posts

Canfor Pulp’s Northwood Pulp Mill to Resume Operations

Following the announcement of a tentative agreement in the labour dispute at B.C. ports, Canfor Pulp Products Inc. is announcing that Northwood Pulp Mill in Prince George will resume production next week (the week of July 17).

Ahlstrom receives a binding offer for Stenay plant from Accursia Capital

In March 2023, Ahlstrom launched a consultation process with employee representatives at its Stenay plant in France about the possibility to divest the plant, and if a buyer cannot be found considering closure. After a long process to identify potential buyers, Ahlstrom has received a binding offer from Accursia Capital to acquire the Stenay plant. The potential acquisition is subject to consultation with employee representatives. Since the beginning of the consultation period, finding a buyer has been Ahlstrom’s priority. The group has been working actively with all the local economic and political stakeholders in the area to support the process of finding a buyer. With a strong commitment to achieving a positive outcome for all parties involved, Ahlstrom would be dedicated to making every effort during the transition to ensure the plant successfully enters its new chapter.

UPM continues to aim for business-specific collective bargaining with the Paperworkers’ Union

UPM continues to aim for business-specific collective bargaining with the Paperworkers’ Union but has also begun preparations for arranging working conditions temporarily without a collective labour agreement until agreements with the union are signed. During this week UPM communicates the temporary terms of work to employees of businesses where the contractual party is the Paperworkers’ Union. The current collective agreements between the Paperworkers’ Union and The Finnish Forest Industries Federation will end on 31 December 2021. After termination, the current agreement has no binding effect as the parties of the agreement change. The time for negotiation is running out, so UPM must prepare for a situation where no agreement is in place. “To ensure business continuity and payroll, we will prepare to arrange working conditions after the turn of the year according to labour law, UPM practices and personal employment contracts. With business-specific collective bargaining, we can offer better terms for everyone than without an agreement. Entering the negotiations with the Paperworkers’ Union is still our goal”, says Executive Vice President Riitta Savonlahti of UPM Human Resources.
Back To Top
×Close search
Search